WICE Internal Signals

The following WICE-internal signals are supported by Signal Reader:

Signal name	Description
Accelerometer_X	The value of the X direction of the WCU's built-in accelerometer. (See WICE Accelerometer.)
Accelerometer_Y	The value of the Y direction of the WCU's built-in accelerometer. (See WICE Accelerometer.)
Accelerometer_Z	The value of the Z direction of the WCU's built-in accelerometer. (See WICE Accelerometer.)
Audio_Device_1	The status of audio device 1 (1=recording, 0 = not recording). When present in a recorder, the audio module will record sound from the device.
Audio_Device_2	The status of audio device 2 (1=recording, 0 = not recording). When present in a recorder, the audio module will record sound from the device.
Busload_CAN_<n>	The bus load on CAN bus <n>
Connectivity	The current connectivity of the WCU (0 = unknown, 1 = none, 2 = 2G, 3 = 3G, 4 = 4G, 5=5G, 6=WiFi, 7=ethernet)
CSQ	The built-in modem's CSQ value (Signal Quality)
Date_Year	The year of the current date.
Date_Month	The month (1-12) of the current date.
Date_Day	The day of the month (1-31) of the current date.
Date_Weekday	The day of the week (1-7, where 1 is Sunday).
Date_Hour	The hour of the day (0-23).
Date_Minute	The minute of the hour (0-59).
Date_Second	The second of the minute (0-59).
Dynamic_<n>	Special signals with values assignable from external software components (typically used for Rapid Prototyping).
IO__AI_<n>	Analog input number <n>
IO__DI_<n>	Digital input number <n>
IO__DO_<n>	Digital output number <n>
Log_All_Frames_CAN_<n>	Log all CAN frames on CAN bus <n>
Log_All_Frames_FlexRay_<n>	Log all CAN frames on Flexray bus <n>
Latitude	The GPS latitude
Longitude	The GPS longitude
Network_Receive_Rate_eth0	The rate i kilobilts per second of receiving data on the eth0 interface
Network_Receive_Rate_eth1	The rate i kilobilts per second of receiving data on the eth1 interface
Network_Receive_Rate_ppp0	The rate i kilobilts per second of receiving data on the ppp0 (i.e. mobile data communication) interface
Network_Transmit_Rate_eth0	The rate i kilobilts per second of transmitting data on the eth0 interface
Network_Transmit_Rate_eth1	The rate i kilobilts per second of transmitting data on the eth1 interface
Network_Transmit_Rate_ppp0	The rate i kilobilts per second of transmitting data on the ppp0 (i.e. mobile data communication) interface
Power_Mode	The power mode of the WCU
Random	A random number generator
Random_Start	A random number generator updated once, at program start
Random_Setup_Switch	A random number generator updated at each measurement set-up switch
Start_Signal	The start signal of the WCU
Start_Signal_Voltage	The voltage of the start signal of the WCU, in millivolts
Speed	The GPS speed
Start_Switch	The start switch of the WCU
Tester_Present	When present in a measurement set-up, a Tester Present diagnostic request (with suppress Positive Response bit set) will be sent periodically.
Time_Since_Epoch	The time elapsed since the epoch (Jan 1, 1970, 00:00)
Time_Since_Start	The time elapsed since the start of the task
Time_Since_Setup_Switch	The time elapsed since the activation of the current measurement set-up
Trigger_Button	The trigger button connected to the WCU
Usage_CPU	The WCU CPU usage in percent
Usage_Memory	The WCU memory usage in percent
Video_Camera_1	The status of video camera 1 (1=connected, 0 = disconnected). When present in a recorder, the video module will record video from the camera.
Video_Camera_2	The status of video camera 2 (1=connected, 0 = disconnected). When present in a recorder, the video module will record video from the camera.
WCU_Battery	The WCU battery voltage in millivolts
WCU_Temp	The WCU internal temperature in degrees Celsius
WCU_Storage	The available storage on the WCU in percent
WCU_Voltage	The WCU voltage in millivolts