Wice audio

In version 2.56 of the WICE system, audio was added. This enables the possibility to record audio from the WCU by installing a microphone. TBD Someone who knows more about how to add that to the WCU.

Introduction

By adding the possibility to record audio som interesting opportunities opens up. Assume a driver experiences a sound or something out of the ordinary. By pressing a button the driver can record a short message. This can later be listened to by someone analyzing the data. In later versions we will introduce the possibility to see that an audio recording is available when looking at other data that is available. Such a function will be rendered in connection to preview files and looking at a WCU:s measurement timeline panel. This can add valuable information to the observed data. This can already be done for a video assignment, see TDB (where is this described?).

Recording audio

To record audio an audio task must be created. To see how this is done have a look at TBD. To be able to monitor audio data live, the audio module must be set to allow this. If you fail to do so, no audio will be provided for listening to live.

Configuring the audio module

In addition to creating an audio assignment, the audio module must be correctly configured. For an explanation on how to configure the module, have a look here.

Codecs

When the audio module is configured for monitoring, you have a set a codecs to choose from. The choice has to do with what quality of the sound you would like. Selecting a PCM codec will yield a better quality but consume more bandwidth. In case the connectivity from the WCU to the reflector is limited, interruptions in the sound will be experienced and this can many times make it hard to hear what is said. If this is the case, you can switch to either GSM or preferably G.711 which will use less bandwidth but the quality is lower.